Almont North Dakota

1906     Centennial     2006

The Railroad In Almont
by Warren Hoovestal

     The Northern Pacific Railroad came to Bismarck before the year 1882. The rails were laid on the ice during the winter to ship the materials across for the building at Bismarck of the Missouri River bridge. The railroad came through Sims and Almont in the year 1882. The grade was made with two-horse scrapers, horses, and wheelbarrows. Much hard hand labor was necessary for the completion of the railroad as there were many long hard days for the ones working on the first crew.
     As the grade slowly kept moving on, they followed pretty close along the river bottoms so they wouldn’t have to do so much cutting and filling. When they did have to make a fill, they made a timber construction and then filled in the dirt over that because they thought it would save time and be much easier that way.
     When they came to the Rattlesnake Cut, there was very much work connected with it. The men used horses, scrapers, wheelbarrows, and shovels, but the main piece of machinery used was the steamshovel that they had our there. that would cut the dirt loose and the men with the shovels would load it into the flat cars with small sides on, and they would use the engines with a cable to unload the dirt. While either coupling up or disconnecting a car a young man from Sims was killed.
     The big cut east of Almont was named Rattlesnake Cut because of the whole dens of rattlesnakes there when it wa being built. The workers had to be careful not to be bitten by the snakes. They put dynamite in the dens and blew up the snakes, killing the little ones, which helped considerably. The curve following the cut was called the Rattlesnake Curve because it was the sharpest curve between Minneapolis and the Pacific Ocean.
     The first trains that chugged across the tracks compared with the ones of today were very small but in those days people thought it was a great accomplishment. the engines didn’t have much power and another is that people never dreamed of the long trains they have today. the engineer had an easy job compared with the fireman because all he had to do was control the train and watch the instruments, but the fireman had to shovel coal continually into the fire box. He would very easily catch cold from being in the hot cab and then going out into the cold to get the coal.
     The first signals were flares and had to be lit by hand every evening. During the week days when the section crew was out on the job they lit the flares before they went back to Sims for the night. On Sundays a man would walk from Sims to Almont to light the flares. They would get time and a half for Sunday work. When the Section Crew was working on the North side of Rattlesnake Cut a man would stand on top of the cut and signal for the crew to get of the track when the train was coming. That was before they had a good organized time schedule. When they got the electric signals it was a very great improvement over the flares.
     As time went on the little town of Almont started up. It was in 1906 that it actually got started. Mr. e. W. Hyde was actually the first man to start the town. The town grew up very rapidly and when the brick yard and coal mine in Sims declined, the whole town of Sims declined with it and Almont took the place of Sims. There was a brakeman working on the railroad named Mr. Atkinson. He posted posters all along the railroad which said “Watch Almont Grow.”
     Almont was a prosperous looking town and was doing very well. A little ways south east of Almont the even built what is now called the two dams. These two dams were built to protect the railroad grade from being washed out by the creek. Many people, even myself, from around Almont can remember when the whole town would shake because of the trains going through. Many people say the reason for this is that Almont really is sitting on quicksand.
     As time went on and the engines were being improved, they would travel faster. Some of the old locomotives were replaced by these vary fast diesels. then Rattlesnake Cut became more of a hazard for the Northern Pacific Railroad company, because these fast trains would have to slow down so much for the curve. Officials were sent out from Minneapolis to look over the situation. “I can see where the railroad will have to be taken out of Almont said one of them.
     “Yes,” added another. “It will take quite a bit of work to make this sharp curve into a gradual turn and therefore we can just as well build on a whole new grade across from New Salem to Glen Ullin.”
     Before this happened, rumors were being spread around thick and fast about the railroad being taken out of Almont. I can remember hearing a conversation between my dad and Mr. B. T. Olson who worked on the section at that time.
     “Well Beas, do you think the railroad will be taken out?” said Axel
     “No.” replied Beas, “The railroad will never be taken out of Almont.”
     “O, I wouldn’t know about that.” said Axel.
     “Now those rumors will never amount to anything!” exclaimed Beas.
     Those are just some of the different opinions between different people in regard to the railroad situation.
     As the rumors were getting stronger the people were becoming more and more concerned about the losing of the railroad. For every suggestion the officials made in favor of taking out the railroad, Almont’s leading people backed by all the people of Almont and all the people from around Almont opposed each suggestion bitterly and gave a good reason for the preservation of the railroad in Almont. The question became bigger and was talked about all through and around Almont. Will the railroad through Almont be taken out or not? that was the big question and by this time many people were in doubt about it.
     Through much studying and figuring the Northern Pacific Railroad Company definitely decided to take the railroad out of Almont. Work on the new grade was started immediately.
     “Come on men, keep busy,” shouted the foreman of the building crew, as he bossed the men who were building the new grade very rapidly.
In the year 1947 they started taking up the railroad that ran through Almont.
     “I sure hate to see the railroad taken out.” said one farmer.
“So do I,” said another, “because now I will have to haul my grain to North Almont or New salem.”
     It hurt the farmers quite a bit, the same as it did to the other people of Almont.
     “Now that the railroad will soon be gone I think Almont will die out because as farmers haul their products to New Salem they will do their shopping up there too.” said one person.
     “No,” said another,”because it isn’t every day the farmers will go to New Salem and think of all the people in Almont who will do shopping there.”
In spite of the railroad being taken out of Almont, it struggled on and today is prosperous little town.
     Many people did think it would die. They thought the site called North Almont, which is nine miles north of Almont, would take its place.
When the railroad was taken out something had to be done about the elevators. It was decided that they would be moved to North Almont. While they were moving them, one of them blew over in a very high wind which came up during the night. The elevator had been parked there the night before. The depot was also moved to North Almont.
     Today Almont lives just as good and peaceful as ever. It isn’t too bad for the farmers because with the graded and graveled roads and the new motor trucks, it doesn’t take too much longer to drive those extra nine miles. Grocery trucks haul the groceries into Almont and Ed Reeff hauls the mail in from North Almont.
     The ties from the old grade were bought up by a Texas company and resold to farmers.
     Today the trains whistle through North Almont and do not bother Almont which lies peacefully in the valley.

TOP